BEAUTIFUL VIEW

Cleaning the car on a regular basis will keep the car from the 'decay' before his time. It is comfortable utilizing the services of Automated car washes. However, if one chose, would risk stripping the wax coating and scratch the paint finish. Risks can be minimized if the activity is done at home.

Finish is a combination of paint and coating materials translucent plate that covers the body of the car. On the new car finish consists of layers of paint that are stacked by a shiny clear coating. Above the protective wax finish usually coated (protective wax). Finish must be preserved intact because it is the main protector of the auto body damage. Once the finish coating is damaged or torn, the body will be easy corrosion.

Always use a clean cotton cloth and gently. Can also wear gloves made specifically for washing cars. Using a cloth carelessly when washing or drying the car will scratch the surface. Park the car quiet place, preferably where the ramps so that washing water flows faster and faster the car dry.

Mulailkan by washing Peleg (wheels):

Liquid cleaners work better on a dry surface. Spray cleaning fluid such as the user. If the dirt is still menepel use a soft brush, do not rub too hard. When using Peleg alloy, make sure the cleaning liquid does not damage the protective layer.

Washing the body:

Flush the entire car body from top to bottom. Better when using a pistol-shaped spray of water that can be arranged power spray. By adjusting the power level bursts, dry dirt can be removed. Do not be too tight because it will push dirt into the finish layer. Do not forget the pit and Peleg sidelines. If there's dirt left use pre-cleaning solution. Pour the liquid on a rag and rubbing in the dirt. Stubborn dirt can be scrubbed a little harder. Be careful, if scratched too hard at risk. Use a special detergent to cars to the finish unprotected. Using dishwasher detergent will strip wax layer.

Pour the detergent into the cleaning bucket of cold water (hot water will melt the wax coating). Follow the instructions usage and comparison detergent and water. Never more, because it will remove more wax. The experience of many people, mixing 75% of the recommended detergent actually produce cleaner cars shiny. Try finding the most appropriate composition of your own.

When the sides of the car is dirtier than the top, hood and trunk, you can use this strategy to minimize the possibility of scratches. First, start cleaning from top to bottom. Second, replace the cloth when it will clean the dirtiest areas.

To clean the roof,

hood and trunk, start by wetting the parts to be washed. Dip a soft cloth into a tub of liquid detergent. Wipe carefully so that the surface is not scratched. Occasionally dip the rag and kucek to dissolve in the liquid detergent feces. Clean all start from the hood to the trunk. Then rinse with running water, do not spray. Never wash one section and then move to other sections and left in a state has not been rinsed. Cleaning fluid will dry and you will begin the process of washing all over again.

When the top is rinsed completely, now turn to the side, grille, and bumpers. Start by rinsing the sections that will be once again in the wash. Start from Fender. Replace the second lap to wash the bottom of the start of the fenders, grille and bumper latter. This is the most dirty parts, so keep it clean with a rag rubbed over and over again. Immediately rinse any part that has been washed.

Drying the car:

Take a clean cotton cloth and dry or synthetic chamois, place it on the surface will be dried. Set aside some time for lap / chamois to absorb water. Replace the other laps and do way as above to absorb the remaining water. Do not dry the surface by rubbing. Do it that way until the entire surface dry. Open the doors, hood and trunk to remove the water that drips into. Good luck.

translate fr. Mobilku.com

for more details and updates about automotive-technology-guide please visit.........

www.automotive-technology-guide.com

---or---