BEAUTIFUL VIEW

The car is rear-wheel drive system of frequently experienced problems on propeller shaft or more popularly referred to as coupling. If this part is damaged, then the car will experience excessive vibration felt in the passenger space when run on top of 60km/jam. And symptoms that will be increasingly harder as the speed of the car plus.

If you feel such symptoms, it's a sign there is a defect in the joint cross section as contained in the coupling. The fix would be so easy, just replace the cross joint. Only problem, often cross the new joint can no longer mounted on the yoke precisely because it has happened mounting holes wear and tear on his cross joint. Thus, despite having replaced new, the vibration was still stubborn.

Therefore, if the mounting holes in the cross joint that is worn, before mounting it's good plastic glue applied first encountered stout steel at the hardware store. The trick, first clean the hole, - as well as cross joint to terbebes of fat or oil. You can do this by using a cloth that has been moistened with petrol. After that, the new plastic smeared steel adonanya has been prepared, and immediately followed by the installation of a new joint cross. You do not need to wait until the pasta is dry plastic steel, as it will only bother the installation technique.

Once installed neatly, you'll want to put plastic steel that in some corners in order to

outside the home a cross joint yoke firmly attached to his house. Thus, cross joints can work as normal when the coupling is moved in four directions.

Good luck

translate fr: duniaoto.com

for more details and updates about automotive-technology-guide please visit.........

www.automotive-technology-guide.com

---or---