BEAUTIFUL VIEW

Car Dents

Old or new, a car does not look good with a dent on the exterior body or door of the car and especially on luxurious cars. Dents can range from small dings to a big dimple caused by the activity of bumping or crashing into something as the condition occurs.

Car dent repair is a very simple matter if the damage caused by dents is small. At this point, you don't need to take your car to an auto repair shop and spend hundreds of dollars on it just for fixing a small dent. In this article, we discuss car dents repair at home easily and in a unique way. 

So, let's check out a couple of ways and the most unique and best ways of how to repair car dents without taking professional service.

How To Repair Car Dents

Here I mentioned some simple and unique methods of repairing of small car dents and dings have been described below:

1. Just Paint It Up

If the car dent is not much more than a simple flaking coating of paint or scratch on the surface of a car, you can fix it just by applying a simple coat of respective paint as the original shade of color painted. 

However, when you going to do this, you must remember to use sandpaper to remove rust or paint scrapes on the applying area before applying the prime and paint.

2. Use A Rubber Plunger

If the car dent having a sizable ding with no crease in the middle, using a rubber plunger would be the best solution for that car dent repair particularly. It can be able to pop back the steel surface of the car if it hasn't been creased badly. 

This type of car dent repair method can be done by placing the plunger over the dent after moistening its rubber edges and pumped it a couple of times to build up a suction force. Pull the plunger towards the self side that is outward side. 

With a little force applied, a couple of tries will be enough to pull out the car dent. And this plunger method will work if the surface is large such as a fender or door and made of metal.

3. Try With A Hammer

If the car has a small dent on a steel surface, in these conditions try to repair it with a flat-ended rubber mallet that is the hammer. It is firm enough to fix a dent on the exterior of a car but it is less likely to leave any ugly marks on the surface. 

Firstly, wrap a flat metal piece with a piece of rag and place it directly on the dent. Now, use the rubber mallet to bang the surface area around the dent from the underside.

Use a small hammer with sufficient force for a small ding and a big one for large car dent repairing works. Besides that, be very careful that not to bang the surrounding area of the pitted part as it is likely to create a few more bumps on the surface.

4. Glazing Putty For Tiny Dings

Now here is another best method for small car dents, apply a glazing putty is an excellent option for filling up the dent places with chipped paint or tiny dimples. 

Apply it to the particular dent and ding spot with a putty knife and then use primer and paint as the final touch-ups to that dent area to make it finished as of original. It's very simple as you just have to follow the directions on the package.